Product: |
Image |
Brief Description: |
$/unit: |
S&H(Cont. USA): |
Buy It Now |
WPParts: Model: RKit2 | | Oilless vacuum Pump Rebuild kit for:WVP5+email the pump model: Cylinder X2, O-rings X2, seals X3, Backflow Valves X2 | $77.77: | $10 |
|
WPParts: Model: RKit1 | | Oilless vacuum Pump Rebuild kit for:WVP5 +email the pump model, O-rings X2, seal X3, Backflow Valve X2 | $47.77: | $9.95 |
|
WPParts: Model: ORing | | Cylinder O-Ring/seal in the cylinder on the piston for WVP5,WVP4 or other, email seller of your pump model, 2 in a pack | $19.95: | $5.95 |
|
WPParts: Model: Feet | | Rubber foot with fastening screw for vacuum pump models:WVP5,WVP4,2 pairs 4 in a set per order,email seller the pump model | $14.95: | $5.95 |
|
WPParts: Model: DTrap | | Dust filter/Liquid trap/collector for vacuum line, add to pump port or on the vacuum line,extend the life of pump, 1/2 FNPT connection | $87.00: | $9.95 |
|
WPParts: Model: PB24 | | Intake port adapter, 1/4 MNPT to give a 1/2 Barb hose connection, for vacuum pump models:WVP5,WVP4 etc | $5.95: | $5.95 |
|
WPParts: Model: PB88 | | Intake port adapter, 1/2 NPT to 1/2 Barb hose connection, for vacuum pump models:WVP10,WVP12 etc | $7.95: | $5.95 |
|
WPParts: Model: Silencer | | Mini-Silencer or muffler for oil-less vacuum pumps models:WVP5,WVP4. 1/4 NPT connection | $9.99: | $5.95 |
|
WPParts: Model: WCap | | Moter start run capacitor for vacuum pump models:WVP5,WVP4, email seller the pump model | $9.95: | $3.95 |
|
WPParts: Model: WFA | | Intake port mini-dust filter for oil-less vacuum pump models:WVP5,WVP4 & Smaller pumps for workshop applications; with an adapter 1/4 X 1/4 MNPT | $12.95: | $5.95 |
|
WPParts: Model: WMufb | No tn_Image | Mini-Silencer/muffler for oil-less vacuum pumps models:WVP5/4/3 plastic housing, 1/4 NPT | $9.99: | $4.95 |
|
WPParts: Model: WMufc | No tn_Image | Silencer/muffler for oil-less vacuum pumps models:WVP8/10/12 plastic housing. 1/2 NPT connection | $17.99: | $5.95 |
|
WPParts: Model: WDFA | | Intake port dust filter assembly for oil-less vacuum pump models:WVP5 and smaller pumps like WVP4 etc. for workshop applications; 1/4 NPT | $12.95: | $5.95 |
|
WPParts: Model: Pads | No tn_Image | Rubber foot/Pads with fastening screw for oilless vacuum pump mounting for:WVPx and HWx, 2 pairs 4 in a set per order | $17.95: | $5.95 |
|
WPParts: Model: WFC | | Filter core replacement, for oil-less vacuum pump models:WVP5,WVP4; with an adapter 1/4 X 1/4 MNPT | $7.95: | $5.95 |
|
WPParts: Model: BFValves | No tn_Image | Back flow valves for oil-less vacuum pumps, Small sheet-metal like SS piece on the pump cap, a pair in a order, | $9.99: | $2.95 |
|
WPParts: Model: VS2 | | Automation Deep Vacuum Control Switch Actuator full range/differential Pressure 1/4 NTP male Port, 115 or 220 VAC Circuit 15 Amp | $79.99: | $7.95 |
|
WPParts: Model: VG2 | | Analog Vacuum Gauge, from 0 to -30 inch Hg/0 to -100 kPa, 2 inch face SS case 1/4 NTP male connector on back center | $17.97: | $5.95 |
|
WPParts: Model: VG3 | | Analog Vacuum Gauge, from 0 to -30 inch Hg/0 to -100 kPa, 2 inch face SS case 1/4 NTP male connector on lower side | $17.97: | $5.95 |
|